Simple solutions for the general problems of computers

Simple solutions for the general problems of computers 

Hello Guys,
Hope Everyone is well.

We often build new or old PCs. But after building Windows Setup, Program Install, or any other task, you have to face many problems including shutting down the computer, restarting, error message show, blue screen or BSOD (Blue Screen Of Death). When all these problems are seen, it creates a disturbing situation and causes many thoughts. Most of the time this is because of faulty RAM or faulty hardware. If all these problems arise, today will be a brief step-by-step demonstration of how to solve them.

Hardware Installation

1. When installing the CPU, the motherboard or processor pin has to be checked to see if there were any problems. Because Pin contact Loss ie CPU connection to the motherboard CPU does not work properly, problems like Boot Problem, Memory Problem, Device Not Recognized etc.

2. You should check if there is any problem with the RAM slot or RAM, such as the damp, pin twisted or burned on the RAM pin. If the dirt needs to be carefully cleaned, it is best to use Alcohol Wipe Pad for cleaning. There is no way to change it if it is curved or burned. But in this case, you will not be able to claim warranty, which means you will have to buy new RAM with the money again.


Software Installation

1. Problems may arise due to pirated software, malware, viruses etc. Therefore, you need to download and use specific software from the correct website.

2. You can see which operating system your PC supports, CPU, GPU, etc. But the latest generation hardware does not offer that much support under Windows 10.

3. Many times, there may be problems for driver compatibility. In this case the driver of the new or slightly older version will need to be installed.

After everything is fine and if the problem persists then it is finally the turn to test the RAM. But how to directly understand if there is a RAM problem?

1. If the RAM is damaged or for some reason, the connection is lost, the speaker on the motherboard will continue to sound beep.

2. If setting up Windows or shutting down or restarting with an error message while working on a PC, then there are some issues with RAM. Search Google for the error code in your BSOD to find out more about that problem.

Ram Checking System

1. Open Windows Memory Diagnostic from the Start menu and click on Restart Now and Check For Problem to restart your PC and test your PC's RAM, immediately after the test or after Windows test open Windows will give you the final report.

2. First you have to boot Pendrive with MemTest86. Then boot the pen drive from Bios and start the test. One has to take time to test. It will show you any problems encountered during this process.

Hardware Compatibility should be checked while building the PC. It is best to update the motherboard's Bios for better compatibility. After all, good quality hardware should be used to avoid the hassle of buying good things for some money.


Thanks
Stay with us